PowerResins Yellow
Sharp, Smooth and Perfect Casting Quality resin!
PowerResins Yellow is a very sharp and smooth resin that provides perfect casting results with any brand of investment.
- 100% ash-free burnout for direct casting of jewelry. You may easily cast 21k, 18k, 14k gold or silver
- Can be used for any type of jewelry including engraving, smooth surface, high details or filigree jewelry.
- No need for post-curing: Only wash with ethyl alcohol and dry with air then it is ready for casting.
- Use of standard burnout cycle, no need for special treatment
- Not smelly or dangerous for health
- Suitable for 365nm / 385nm and 405nm wavelenght 3D printers
Yellow Resin Print and Cast Samples
The parts are raw casting with no polishing.
PowerResins Opaque
Perfect surface and print quality !
PowerResins Opaque is a special 100% ash-free castable resin that is formulated for DLP 3d printers in order to get perfect printing and direct casting quality in jewelry manufacturing. It has an opaque colour and provides perfect detail and surface quality in printing and casting.
- 100% ash-free burnout for direct casting of jewelry. You may easily cast 21k, 18k, 14k gold or silver
- Can be used for any type of jewelry including engraving, smooth surface, high details or filigree jewelry.
- No need for post-curing: Only wash with ethyl alcohol and dry with air then it is ready for casting.
- Use of standard burnout cycle, no need for special treatment
- Not smelly or dangerous for health
- Suitable for 365nm / 385nm and 405nm wavelenght 3D printers
Opaque Resin Print and Cast Samples
The parts are raw casting with no polishing.
PowerResins Dark
Perfect sharp details and easy to set stones!
PowerResins Dark has been developed specifically for direct casting of jewelry with high details. It provides perfect casting quality combined with very sharp printing abilities and easy to set stones.
- Very high precision and accuracy
- Perfect printing properties with sharp details suitable for jewelry with micro-pave prongs, engraving, highly detailed figures or filigree
- Easy to set stones directly on printed model before casting
- Create lighter jewelry with perfect precision
- Perfect 100% ash-free burnout for direct casting
- Use of standard wax burnout cycle
- No need for post-curing after printing
- Suitable for 365nm / 385nm and 405nm wavelenght 3D printers
Dark Resin Print and Cast Samples
All these samples were printed using our Mega and Sega 3D Printer. Some parts are raw casting with no polishing.
PowerResins Wax
Get perfect smooth surfaces and easily set stones!
PowerResins WAX is a special wax castable resin for 3d printers that is very similar to wax. It is used for jewelry casting and most specifically for models with stone settings and surface models.
This resin has 100% ash-free burnout and provides top quality direct casting using a standard burnout cycle.
- Designed specifically to easily set stones on printed model
- Get perfect smooth surfaces also for large surface jewelry
- Same as wax properties and texture
- 100% Ash-free burnout for direct casting
Wax Resin Print and Cast Samples
The parts are raw casting with no polishing.
